Text Box: To Input Repeater setting  OMDI –477CB If you turn the radio on and it shows CB 1-40 channels,  turn the radio off , hold the ‘F’ button, while turning the radio on again, that will take you into the, Frequency and channel mode, next press the  VFO button and you are taken to the   VFO mode, where all input adjustments can be made  In VFO mode set the frequency to 476.425 = channel 1. ( you wont see a channel indicator )  Press (F) + 8OST keys to set repeater offset value, you will see 00000, input 00750  Channel 1. the value is 476.425 mhz  see below. This should only need to be done once, as it will set the other channels automatically  Then press the PTT switch to confirm and save. Then press (F) + #REV key to set TX frequency OFFS ..5..  Will be seen in the screen.  Press the right arrow > till you see OFFS..+.. Sign. Then press PTT switch to save the setting, you will see 477.175 in the screen, when transmitting, settings complete If you want to check and have another radio put it on channel 31  and it will receive your transmission That’s channel 1. all other channels to 8. are done automatically.  For repeater channels 2, 3, 4, 5, 6, 7, 8, just scroll up to the mhz to the corresponding repeater Channel that you require see list BELOW

Input Channel

Frequency (MHz)

Output Channel

Frequency (MHz)

1

476.425

31

477.175

2

476.450

32

477.200

3

476.475

33

477.225

4

476.500

34

477.275

5    EMERGENCIES

476.525

35     EMERGENCIES

477.275

6

476.550

36

477.300

7

476.575

37

477.325

8

476.600

38

477.350

  Hit Counter